Oil for molding and releasing petroleum solvent based concrete Robic S500 Alborz Chimie Asia

Oil for molding and releasing petroleum solvent based concrete

Product description:

Robic S500 is an oil solvent based chemical liquid suitable for easy separation of the mold from the concrete surface and achieving a smooth and uniform surface. Robic S500 is designed for use in metal, wood and polymer molds and is reliable for creating a clean surface.

Mode of effect:

The Robic S500 creates a uniform surface by reducing air bubbles trapped between the formwork and the concrete surface. Robic S500 also facilitates the separation of concrete from the formwork due to the reduction of cement adhesion to the surface of the formwork.

Advantages:

Creating a smooth and uniform surface on the surface of hardened concrete

Easy separation of formwork from concrete

Easy cleaning of the mold surface

Increase mold life

Method of Use:

Prior to application, the mold surfaces must be thoroughly free of grease, dust, and excess minerals and chemicals. Robic S500 should be applied in two very thin layers immediately after removing the contamination by spray or brush. If a wooden mold is used, it is better to apply thin layers again after applying two layers of Robic S500. In this type of mold, there is a possibility of absorbing the first layer by wood. In any case, the accumulation of large amounts of material in one part or corners of the mold should be avoided.

Coverage:

By spray method, one liter of Robic S500, depending on the smoothness of the surface and its pores, can cover between 3 and 7 square meters of surface. For wooden forms, due to the presence of adsorption, the amount of coverage is less.

Maintenance:

Store indoors away from direct sunlight and high temperatures.

Robic S500 is flammable and should be stored and stored as incendiary materials. If stored in the main container with the lid closed and the above conditions can be used up to one year after production.

packing:

20 liter buckets

220 liter barrels

Safety items:

Wear gloves, goggles, and a safety mask when using. Robic S500 is flammable and non-drinkable. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice.

Service and Support:

The technical group of Alborz Shimi Asia Company is ready to cooperate and provide services to esteemed consumers to perform the necessary tests and collaborations to determine the amount and exact method of consumption of Robic S500.

The information contained in this catalog is correct, accurate and based on the latest results of studies and tests obtained by the experts of Alborz Shimi Asia Company, but any advice provided by this company, sellers and distributors of the product is not a criterion for determining the exact amount and method of consumption. This should be done by performing accurate calculations and performing the required tests by the relevant experts.