Water reservoir Polymer Roshun

Estimation of the water tank volume required

First step you need to specify the amount of water tank volume you need. According to Tehran Water and Wastewater Company & NBSP; A 5 -person family requires 250 liters of water storage before the pump. If you need to store the total consumption of one day per person, you can consider 150 liters per person. That is, a 5 -person family of 750 liters is sufficient as a & nbsp; 750 liters of water & nbsp;

If the required tank volume is not provided and the water consumed exceeds the volume of water is stored, it is possible to discharge the water inside the tank during peak hours and it is high and it is high and it is very high. It causes the water pump to burn and disrupt the water. If the tank is too large, that is, the volume of water storage exceeds the consumption, the water inside the tank loses its quality and conditions for the growth of all kinds of germs and bacteria are met. You can consult with our technical experts in the polymer to calculate the volume of the required water tank.

Select and prepare the location of the repository

One of the main steps of buying tank is the location of the tank installation location. Installation can usually choose indoors and in places where they are less visible. Become. Places such as parking, underground, engine room, roof and & hellip; . Therefore, the dimensions of the installation of the tank and the space available should be considered when selecting the tank. The standard installation location is in the facility room. But if you are not predicted in your building, check out these spaces: near the water pump and in the backyard, near the pump in the pilot, the roof.

The dimensions of access to these locations should also be taken into consideration as many have been reported by customers whose purchased product has been transmitted. They were not at their suggested installation site and inevitably either changed their repository or changed the installation location. Another point in this regard is that the location of the tank must be perfectly smooth and without any & nbsp; Being low because if the tank is completely filling, it causes hole or rupture due to the pressure applied by the water inside it.