Market construction
Market construction

Warm galvanized Rooy Pooshan

Rooy Pooshan
Iran

The standard hot galvanized is made of a molten metal that can cover the surface of a piece. The molten metal used for this is usually melted.
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

similar products

Warm galvanized Rooy Pooshan

Ten of Galvanized Benefits

full cover

Because zinc coating in hot galvanized to prevent corrosion in metal and steel, it is essential that it can cover the entire surface of the steel and be able to all parts such as: inside, corners, gaps. And & hellip; And parts of the steel that cannot be helpless by other methods by using this method and dipping the steel into the galluanized tub.

Long Life

Because these coatings are used in the construction of structures and sectors that require high life span, the high shelf life of hot galvanized coatings is one of the most important benefits for more than 50 years, since they are one of the most important benefits It is no longer necessary to every few years complex processes such as repair, maintenance and & hellip; Repeated.

Rise of Construction Speed ​​

Galvanized steel steel is ready and for other use of preparations such as stainless steel painting and & hellip; Not and is ready to work.

Lower Price

Hot galvanized prices are very affordable even despite the huge advantage, for example, if it is to be painted on steel, it is very difficult and costly. And requires a more sophisticated mechanism.

High speed of galvanization

galvanizing steel parts using this method requires about 1 hour while other methods take at least 1 week.

firm coating

In this way, there is a strong connection between the zinc and the steel, which has many features such as: high resistance to corrosion, mechanical damage and damage that may occur during use. /p>

Simple Quality Inspection

Because the whole piece is usually immersed in the tub at once, so they can easily be inspected and quality after the work is completed and does not require a sophisticated job.

low cost compared to high durability

As we said, the cost of using this method is lower than other methods, but for example, this method is higher than that of cold galvanized, but the components covered with cold coatings are durable and long life. They have lower, so they are lower than the lifetime of these coatings.

Reliability

These coatings are made using the British BS EN ISO 1461 standard, which can be used with appropriate thickness, size and high reliability.

protection against different weather conditions

Since steel is naturally reluctant to respond to oxygen, the use of these coatings can provide good protection from different climatic conditions and oxidation to make the burnout less likely and steel for a duration of time. To be protected longer.

In short these coatings have the following benefits.

  • Coating formed, has a long life (even in high heat and humidity and wind and rain).
  • The price is finished, cheap.
  • for components in a variety of forms will create uniform cover.
  • When transportation, it is highly resistant to injury, and due to its cathedral properties, it offsets the scratches and minor bells and protects the steel.

User's comments and scores