MTOPROOF P-92 bituminous protective coating Clinic Beton Iran

MTOPROOF P-92 bitumen protective coating is a bitumen-based protective coating that is designed to create a permanent barrier against the passage of water and water vapor and can be used to create evaporation barrier layers, damp-proof shells, cover tanks and pipes. It is used for drinking water, protecting underground concrete structures, curing concrete while preserving water, and protecting metal surfaces against corrosion.

MTOPROOF P-92 bituminous protective coating according to ASTM-D-2939 standard

Features and specifications of MTOPROOF P-92 bituminous protective coating

- It is single component and diluted with water.

- Quick drying

- Can be used on wet surfaces

- After consumption and evaporation of water, it dries and creates a flexible and elastic layer.

- After drying, it is resistant to moisture and does not dissolve in water.

- Possessing the property of extraordinary water retention and preservation in order to process the concrete mixture

- Excellent adhesion to most common surfaces in the building

- Ease of implementation due to dilution with water, which can be used with a plastic broom, brush, trowel or spray (coarse nozzle gun) to implement it on the work surface.

Applications of MTOPROOF P-92 bituminous protective coating

Insulation to insulate walls, ceilings, basements, tunnels, cold storages, swimming pools, sanitary facilities, tanks and especially foundations and protect against the effect of chlorine.

How to use MTOPROOF P-92 bituminous protective coating

Surfaces must be clean, dry and free of oil and grease. All scattered and sticky particles, such as iron particles, shavings and metal flakes, as well as mortar and cement stains must be removed. To remove such materials, a wire brush or coarse brush should be used, and finally the resulting dust should be removed by a soft brush or compressed air. To clean oil and grease from working surfaces, a specific agent or remover must be used for each grease or oil. For proper and optimal adhesion to steel, it is recommended to subject the steel surfaces to SA2 ½ standard Grit Blasting (coarse grain sandblasting).

MTOPROOF P-92 bituminous protective coating can be used on damp, brick and plastered surfaces provided that there is no free surface water or splashing on the work surface. In cases of doubt, it is suggested to test a limited amount of MTOPROOF P-92 bitumen protective coating on the desired surface.

Consumption amount of bituminous protective coating MTOPROOF P-92

Each 1 kg can be used for 2 to 6 square meters. Of course, this amount can be increased or decreased according to the existing conditions and roughness of the surface.

The method of implementing bituminous protective coating MTOPROOF P-92

Stir thoroughly before use.

DAMPING SHELLS, VERTICAL Evaporation Barrier Layers Protection of Water Tanks and Pipelines Apply a full coat of MTOPROOF P-900 to the work surface and allow to dry. The coverage ratio should be about 3 square meters per liter. Apply the second layer perpendicular to the first layer on the work surface.

Concrete coating or coatings:

In cases where it is necessary to cover the top of the working surface with concrete coating, clean sand with a nominal size of 2 mm should be spread on the second wet coating to obtain a surface with good mechanical adhesion for the substructure. Before coating, all scattered sand must be removed from the work surface.

Active ingredient:

For moisture-proof surfaces, use two layers of MTOPROOF P-92 bituminous protective coating. While complying with the ASTM C309 standard, this improves performance and efficiency by more than 80%. This product can also be used on wet concrete.

Repairs:

Damaged areas of MTOPROOF P-92 bituminous protective coating can be easily repaired by re-coating in one hand.

Cleaning and maintenance of tools:

All tools and equipment must be cleaned with a special solvent immediately after use. If the temperature of the surface under the work is between 6 and 45 degrees Celsius, the execution operation can be started.

How to store MTOPROOF P-92 bituminous protective coating

It can be used in a covered warehouse at a temperature of 30-40 degrees Celsius for 12 months. Failure to observe proper storage conditions may damage the product or its container.

Purchase and price of MTOPROOF P-92 bituminous protective coating at Iran Concrete Clinic

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of concrete waterproofing, refer to the Bazar system and buy MTOPROOF P-92 bituminous protective coating of Iran Concrete Clinic from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival by placing construction products and inserting the suggested price and increase the sale of their products.