UNIFIX tile adhesive Clinic Beton Iran

UNIFIX tile adhesive is a powder tile adhesive modified with polymer materials according to DIN 15618 part 2 standard. This product is against frost cycles. Flexible tile adhesive is one-component or single-component. One component flexible tile adhesive.

Uses of UNIFIX tile adhesive

As a tile adhesive in gluing ceramic materials in a thin layer manner

To install natural stones according to the properties of the product

As an adhesive for construction boards made of plaster, cellulose plaster and polystyrene

UNIFIX tile adhesive coating surface

The surface must be dry or slightly moist, capable of bearing load and free from pollution and dust. Absorbent surfaces must first be prepared by ASO-UNIGRUND. The smooth concrete surface must first be roughened, subjected to air suction and coated with ASO-UNIGRUND.

How to use UNIDIX tile adhesive

In a clean container, UNIFIX tile adhesive and water are mixed with a mixing ratio of 7 liters of water and 25 Kg of UNIFIX and mixed until a uniform, lump-free paste-like mortar is obtained. After a short period of time, stir the mixture again and apply it continuously on the surface and floor with a toothed spatula within an hour. Pay attention not to cover the surfaces more than the required amount and always keep the time efficiency of 15 minutes. After that, the tiles are glued on the surface with a little pressure.

Light weight building materials such as gypsum boards or other suitable boards are installed on vertical surfaces by point installation method. Each board is made with a UNIFIX tile tape with a width of 6 cm and a thickness of 2-4 mm. Boards with these specifications can be easily applied to the surface. Of course, you should pay attention to the board manufacturer's advice.

Considerations for UNIFIX tile adhesive

- In tiling surfaces that are exposed to high stress. For balconies and terraces, it is better to use fully elastic AQUAFIN-2KM and UNIFIX-2K/6 systems.

- UNIFIX tile adhesive consists of cement and alkaline materials and reacts with water. Therefore, avoid contact of these substances with skin and eyes, and in case of burning, wash thoroughly with water.

- When installing molded stones or natural stones, pay attention to the specifications, key points, recommendations for installation. If there is no certainty, be careful before starting the work completely.

- It is recommended to use ASODUR-EK98 to reduce water penetration.

- For surfaces containing calcium sulfate joints, it is recommended to use a primer such as ASO-UNIGRUND-GE or ASO-UNIGRUND-K with a ratio of 1:3 with water.

- To reduce the effect of ETTRINGITE on calcium sulfate layers, it is recommended to use UNIFIX - AEK. To replace such layers with residual humidity above 1% for heated structures and residual humidity above 1.5% for unheated structures, thin layer mortar that hardens quickly is not recommended.

- Mortar that has already hardened cannot be reused by adding water. Adding new water or mixing with fresh mortar will reduce the strength.

- For areas that are permanently under water (such as swimming pools), it is recommended to use UNIFIX-2k and unifix-2k/6 with the (float-buttering) method. If there is direct contact between the tip (head) of the molds and the cement attached to it, a chemical reaction (which is due to magnesium's tendency to expand) will occur and may cause the destruction of the industrial flooring.

- UNIFIX Tile Adhesive is a water-curing mortar-type sealant, although under adverse weather conditions it will take several days to fully cure and must be protected from rain and frost during this time. The surfaces on which UNIFIX is not applied must be protected from the effects of this substance.

Purchase and price of UNIFIX tile adhesive

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of tile adhesive, refer to the market system and buy UNIFIX tile adhesive from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival by placing construction products and inserting the suggested price and increase the sale of their products.