Suppliers | Expiration date | Price (Toman) | Minimum order (MOQ) | City | Phone number |
---|---|---|---|---|---|
The price is not recorded |
Hardening spray of concrete surface (hardener) consisting of synthetic mineral aggregates and cement. It is a ready-to-use product consisting of MTOTOP 900 concrete hardening mineral artificial aggregates and cement that is applied dry-sprayed on fresh concrete surfaces. Provides continuous protection against successive uses, impact and wear for MTOTOP 900 concrete surface hardener. It also shows high resistance to industrial chemicals, fats, industrial oil, detergents and hydraulic fluids found in the aviation industry.
Premixed dry shake surface floor hardener
It is designed in such a way to ensure the optimization of durability in conditions where MTOTOP 900 concrete hardener concrete floor is subjected to medium or heavy traffic and also when it is considered to be dustproof.
MTOTOP 900 cover hard concrete is composed of high-quality non-metallic artificial inert aggregates, exclusive chemicals, pigments and cement.
In compliance with ACI 302-1 R-89 and ACI 201-2RR77, the presence of concrete with a proper mixing plan is required. The concrete producer must be sure that the ratio of water to cement, the amount of cement, and the flow rate are in accordance with the minimum standard and according to the following values:
Concrete should not have separation or water leakage, and it should not contain more than 3% of air. When we apply this product on concrete with microsilica, we must be careful with the application time. For the best performance, it is recommended to use water-reducing additives such as mtoplase or mtocrete in concrete. The concrete layers on which the MTOTOP 900 concrete hardener is applied must have a minimum thickness of 75 mm. After concreting, the surface of the concrete should be leveled using a bar and then vibrated.
Level the concrete surface with a wooden trowel to avoid excessive polishing. Fix surface leaks. (Do not use a sponge) Spray MTOTOP 900 concrete hardener on the sides of the executive parts (where the executive and expansion joints are found) to a width of approximately 80 mm. Spread them on the surface using a wooden trowel.
MTOTOP 900 concrete hardener is ideally applied to a surface that is neither too dry nor too wet. The ambient temperature is the main factor determining this time. Normally, at temperatures of 35 to 45 degrees Celsius, a time of 30 to 40 minutes after concreting is suggested. This period will be longer at temperatures below 35 degrees Celsius. With the help of a long stand that runs the length of the concrete block, spread the rod material by hand on the wet concrete surface. The implementation is done in two stages.
Processing should be started immediately after the last troweling. This can be done by covering the surface with plastic sheets or by using curing materials. It is recommended to use MTOCURE at the rate of one liter per 5 square meters. Get more recommendations about processing materials from Iran's concrete clinic experts because the choice of materials can vary according to possible subsequent work on the surface.
Dry spraying should not be done in direct sunlight or in hot winds. The above care prevents early clay drying at a depth of 5 to 10 mm on the surface of the material and prevents its peeling and separation from the moist concrete below. The above adverse event will show itself when troweling. Like other concrete surfaces, the processing or curing of concrete and its time after the execution of concrete surfaces is very important and fundamental and must be done quickly after execution.
Coatings of one color can also be applied on the finished surface of MTOTOP 900 concrete hardener, but before choosing them, you must pay attention to materials such as the type of processing, the shape of the surface texture, and other things. (with expert department) Please contact Iran concrete clinic technician for further guidance.
The amount of material used can be between 3 and 7 kg per square meter, but in most industrial cases, a coating of 5 kg per square meter is recommended. For more information, contact the Iran concrete clinic technical service office.
Keep under cover. Store away from direct sunlight and high temperature. The shelf life of this product is 12 months under proper storage conditions. Failure to observe the proper storage method will damage the product or its packaging.
This product contains cement materials that can cause irritation. Avoid contact with eyes and long contact with skin. If contamination occurs, wash with water and inform the doctor. Prevent children from accessing it.
Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of concrete hardener, refer to the market system and buy MTOTOP 900 concrete hardener from reliable sellers.
Manufacturers and suppliers can register in the market construction system and participate in the special sales festival and increase the sales of their products by placing the construction products and inserting the suggested price.