Market construction
Market construction

Sewage pumps DOMO Pentax

Pentax
Italy

The sludge pump is a group of centrifugal or centrifugal pumps and is used to transport and pump liquids with solid and suspended particles such as turbid water and industrial and domestic wastewater. These types of pumps are suitable for pumping liquids containing suspended solids and long fibers, sewage, polluted waters, turbid water, abrasive fluids and so on. Sludge pumps are sometimes referred to as concentrated pumps, sewage pumps, slurry or slurry pumps, and mud pumps.
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

similar products

Sewage pumps DOMO Pentax

Submersible and dry sludge pump:
The sludge pump is produced in both dry and submerged types. The submersible sludge pump is manufactured with an outlet of 1.5 inches to 20 inches. Each submerged sludge pump is also used in both fixed and removable installation. This type of sludge pump has IP68 protection and can be fully immersed in the fluid. Passing the fluid around the electromotor, which is fully sealed, will cool the electromotor and thus increase its service life, as well as increase the efficiency of the motor by reducing the current.
In the dry sludge pump, the electromotor is at the desired height outside the fluid, and the pump is immersed in the fluid. The two are connected through a coupling so that the electromotor can be easily separated if needed. The most important parameters in selecting a suitable sludge pump are pump discharge, pump head, pump circumference, pump outlet diameter as well as the material used in the electro pump.

The maximum temperature of the pumped liquid should not exceed 40 ° C
The sludge water pump shall not be used for pumping waters containing salts, flammable wastewater, corrosive or explosive substances unless suitable sex with these materials is considered.
Submersible pumps should not operate in dry environments due to the cooling of the engine using the surrounding water. Fluid or surface control should be used for fluid level control.
Floaters are used to control fluid levels at submersible pump installations, which operate at medium to high capacities with a variety of light and heavy fluids. These filters cut and plug the working circuit of the water pump by reducing and increasing the water level
The working angles of these groups are between 10% and 120% which, if the water level is reduced, will prevent its service life by deactivating the water pump, preventing the tank from filling up by increasing the water level and timely activating the pump. . Flutterers have high precision and are used in environments of relatively low width. To ensure near the highest level, another flute is installed for audio or optical alarms.
When operating a sludge water pump, never block the pump pipe
Water pumps should be avoided in places where it is possible to freeze

Product Specifications

Warranty
has it
Length (cm)
23
Width (cm)
33
Height (cm)
65
Weight (kg)
12
Body Material
Cast iron
Fluid type
Contaminated particles with suspended particles
Carter Material
Rice
Engine power (HP)
550-750
Insulation class
F

User's comments and scores