Multicore wire 1x1.5 Simia

The sprayer is a single-strand wire whose conductor is made of copper metal and the insulation used in the sprayer is a mixture of PVC polymer (PVC) of PVC / C polymer type.

Wire spreader is used inside electrical appliances and also for protection of lighting systems, in dry environments, inside pipes and under and on plaster, but using wire spreader (flexible wire or flexible wire) for direct installation on the cable tray, channel Cabling and tanks are not allowed.

The nominal voltage in the spraying wires is 300/500 V in the spraying wires up to 1 mm2 cross section and 750/450 V in the spraying wires with a cross section of more than 1 mm2.

Application of wire spreader:

Wire spreader, also known as flexible wire or flexible wire, is mainly suitable for installation inside electrical appliances and also for protection of lighting systems, in dry environments, inside pipes and under and on plaster. It is not allowed to use wire spreaders (flexible wire or flexible wire) for installation directly on the cable tray, cabling channels and tanks.

The Simia Cable is made up of a group of annealed copper 5 thin-film wires with high flexibility and 1.5 mm2 cross-sectional area with a rated voltage of 750/450 V. The insulator used in PVC wires is 0.7mm thick and is also used for installation inside electrical appliances and lighting systems, dry environments, inside pipes and under and over plaster. This type of wiring is produced in electrical and electronic equipment in accordance with ISIRI 607-02 national standard or IEC 60227-3 international standard and its conductor electrical resistance at 20 ° C equals 13.3 ohms. Features: Compliant with National Iranian Standard ISIRI 607-3 Compliant with IEC Standard IEC 60227-3 Cable Code IEC 60227-02