Suppliers | Expiration date | Price (Toman) | Minimum order (MOQ) | City | Phone number |
---|---|---|---|---|---|
The price is not recorded |
How does the profile work?
The first step is to make sure the saw is in good condition and capable of cutting profiles, so it is best to check the base of the saw, cable and switch.
Always shorten and lift the power cord of the profile device to suit your work environment, as cutting it can pose a great danger to you and everyone in the vicinity.
Wearing safety equipment such as glasses, gloves, and work clothing will prevent you from being harmed by cutting parts, so be sure to keep safety before work.
Before cutting, be sure to mark the slot on the profile piece with a marker, and make a thickness profile to estimate the cutting time, if the cutting time is long enough to prevent the workplace from warming up several times. Cut and start cutting again. One of the important points of using profiles is to not use this tool on concrete, steel, cement and even aluminum alloy surfaces, although the profiling machine has the ability to cut this type of work, but because of the main mission of this profile cutting machine. The cutting of other materials will slow it down and may damage the user in subsequent cuts.
Also, it should not be used repeatedly in order to prevent damage to the machine during operation and should be rested briefly to prevent the motor coil from being burnt.
Avoid hitting the device to start or remove it, and avoid placing heavy objects on its grip.
At the end of the cutting operation, clean the blade and place it in its proper position. Ensure that the appliance is not plugged in after the job is completed. The blades of the machine need to be replaced as long as they are not sharpened at all. Discard damaged blades of profile because it may slip off the device and cause you damage.
The product is one of the well-known Makita products used for profile cutting. This product has a high power of 200 W and is able to cut metal profiles with high precision. The disk rotates at a high speed of 3800 rpm and is 355 mm in diameter. The engine is coal-powered and is powered by a 2.5-meter power cord. Makita uses a shield around its disk to protect the user as much as possible while working with this device. This shield prevents cuts and pleats from being cut around. There is a retainer stand to work with this unit that you can mount the pieces to be able to cut them more accurately. You can use this profile to cut to 45 degrees. The maximum pipe diameter you can cut with this machine is 155 mm. This product weighs 15.7 kg and is manufactured in 62 x 28 x 50 cm. Makita has released the device as the "M2400".
Other Features :
- With metal shield to prevent spreading and splashing
- Has a very convenient handle
- Ability to cut the pipe up to 155 mm in diameter