Sanding Machine GHB 15-50 Inox FEIN

Sanding units are made differently depending on the customer's needs. These devices have different types:

Disc (circular), belt, roll (ball), sheet

Sanding paper has different degrees of hardness depending on the fine grains used in it. These fine-grained or abrasive materials have different types, ie either natural or synthetic materials have been used to make them.
Natural materials: cobblestone .. sand .., artificial materials: metal chips..aluminum oxide…
At the beginning of the work, rough sanding should always be used, and over time, the sanding becomes softer. After a while, the rough sanding becomes soft, which can be used instead of soft sanding. This sandpaper was used. In order for wooden structures, such as cupboards and showcases, doors and windows, or wooden partitions, to be installed or painted after construction, we must sand them so that their various surfaces are completely smooth. You can use a variety of manual or electric tools for this purpose. These tools include various types of wood sanding sheets, carpentry polishes, and various types of electric sanding machines.

You need a little skill to use an electric sandpaper. This type of device, which is often used in carpentry workshops and the production of wooden decors, is made in two types of roller and sliding. To use the slider sanding tool, simply install the sanding plate on the machine and move the screen on the desired surface. When the device is turned on, a very fast sliding motion of the screen causes the surface to be completely smooth and so-called one-handed and smooth. Fine Company was founded in 1867 in Stuttgart, Germany, and in 1895 invented the world's first manual electric drill. The company specializes in the production of belt grinding machines under the FEIN-GRIT brand, such as manual belt grinding machines, polishing and sanding of Central tube pipes, polishing and grinding profiles and cans, pipe fittings and. .. is leading.
The above device is a professional device with special technical specifications. Using belt grinding technology, this machine will allow you to sand, polish surfaces, remove weld lines, brittle pipe edges and sheets of various metals such as steel, stainless steel and high alloy types. The cutting speed of this machine is three times that of milling stone, and due to the cost-effectiveness of sanding tape compared to the cost of grinding discs, the Finn belt grinding machine can be considered a professional alternative to milling stone. (The fineness of your final surface will depend on the granulation of the sanding tape used.) The size of the sanding tape of this machine is 1000 x 50 mm, which is rotated by a 1.5 kW motor.

The speed of this device for specialized use on stainless steel varies between 2500 to 7900 rpm. Sanding strips of this device can be replaced in just a few seconds using the patented Fine Bar Replacement System without the need for tools. The design of GRIT GHB 15-50 Inox is such that it can be fixed using special bases and in addition to manual mode, it can also be used as a fixed one. It is also possible to use wheeled bases for continuous grinding or for grinding longitudinal welding lines. (These special stands must be purchased separately.) 1 50 * 50 mm grinding belt (K36) is also provided with this device.

Other Details :

- Construction of Denmark

-No load speed: 7900-2500 rpm

- Patented system for replacing sandpaper without tools

- Anti-vibration line