Hose Light 5050 Fine Electric

The above tape is produced in different voltages, powers and colors, and this model has a 50-meter loop. Also, the voltage of this model is 230 volts and 15 watts of power per meter of tape and hose. This FEC strip model is very suitable for concealed lighting, ie when we do not want the light source to be known. In this model of strip yarn, there are 60 LEDs per meter, which has a great impact on the transparency and brightness of the yarn light. The dimming method is commonly used to illuminate the ceiling of modern apartments, so that the thread is placed inside the roof knauf and the light sheath that shines on the ceiling can be seen with the golden color that this thread has a special and special effect. Gives to the environment.

But hose or strip yarns have other uses as well. For example, this beautiful light can be used in the kitchen under cabinets or to illuminate the exterior of buildings. These yarns can be installed anywhere because they are flexible and narrow. And it comes in any shape. Also, this model consumes little energy light and does not cost much to pay the electricity bill. The 220-volt FEC rope has a 50-meter ring, but you can cut and use the parts marked on the bar into smaller pieces. But keep in mind that you need a headlamp to connect each cut to the power supply, which you can get from the Light Home site.

A variety of yarns with different powers, voltages and colors are also used in lighting and decorating urban green spaces, for example, squares, parks, around ponds and fountains, large bridges, special buildings, And even the boulevards that are decorated during celebrations and holidays. Since the SMD yarn of the 5050 Fine Electric model has a plastic cover, it is resistant to moisture and all the mentioned places can be used.