Market construction
Market construction

Ribbed rebar 18 A3 Khorasan steel

Khorasan steel
Iran

Rebar, profile with a solid circular cross-section, usually with ribbed. The main use of rebar in concrete skeleton buildings is to be reinforced in reinforced concrete. Ribbed rebar 400 (A3) is suitable for industrial and construction civil operations and is not suitable for forging and deforming with sharp angles and no welding operations are permitted.
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

similar products

Ribbed rebar 18 A3 Khorasan steel

Steel bars are generally used to strengthen concrete and rock structures to withstand tensile forces. Concrete is inherently strong enough to withstand compressive forces, but tensile forces can break it.

The rock structures and mortar walls are almost concrete-like and have relatively poor tensile strength. Some standard rock pieces, such as blocks and bricks, are designed to have special holes for reinforcing bars. Although high strength tensile materials can be used as reinforcing agents to enhance the tensile strength of concrete, steel and concrete have a particular commonality, which makes them more used than steel for the construction of reinforcing bars. This is a common aspect of the thermal expansion coefficient and its close proximity to steel and concrete causes the same lengths to change at different temperatures to prevent additional internal stresses in the concrete structure, thus preventing premature destruction of the concrete.

 Rebar grooving is intended to improve adhesion between concrete and reinforcing steel. The tread design on the rebar has no specific specifications, but the spacing between the tread and the tread height must be in accordance with the relevant standards. Treads made on the steel body often provide adequate adhesion to the steel and concrete by providing sufficient friction surface, but are still likely to be removed by a force sufficiently strong.

Appearance differences of A2 and A3 rebar:

The design of the wake uses the A3 longitudinal rebar and the A2 transverse rebar. One way to identify the shape of the ris. In A3 bars the treads are criss-cross but in A2 they are single. In A2 bars the treads are parallel but in the A3 bars the treads are seven and eight.

Size (mm)
18
Unit weight (kg / m)
2
Tread width in 1/2 (mm)
1.17
Tread width in 1/4 (mm)
0.81
Transverse tread step (mm)
10.8
Longitudinal tread (mm)
2.7

Surrender strength (N / mm2)
400
Elongation (%)
16
Tensile strength (N / mm2)
600

User's comments and scores