Market construction
Market construction

levelling device LS 4332 Laisai

Laisai
Iran

Levelling (new) means of Optical is in order to determine the difference in height between two or more points relative to each other or relative to a base level in surveying or construction is used.
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

similar products

levelling device LS 4332 Laisai

Including devices primary used to align the positioning level of water (Water Level) is by the ancient Iranians to be. This alignment with. the tube of the straw has been that the middle of it hole and per head it Hole small, attached to a rope will. Two people each head, the rope on a piece of wooden graded keep saying, then people in third bowl from the middle hole with water Reed fall down , if the water from each of the holes of the two head to the extent of inequality and women to wear perfume, head tanabi that more high was located, so the bottom of the  to  identical from the two head drain . The size of the head the wood and place the rope height difference between the two was spot on.Day of the alignment of the glass that holds the bubble was use was . In other countries the alignment of the glass has a curvature, a certain was, that in the event of horizontal, being the balance of the bubble perfectly in the middle of the alignment of the incident . In later years, the ... factory, manufacturer, fixtures, mapping, embedding one or two numbers align on the side of the camera, it possible to provide believed that when the bubbles align in the middle is the axis of the cue on the camera is also horizontal crafted. Thus, by moving the side axis, the sign on a horizontal surface in space is created. With the help of this axis height difference between two points the measurement is. Thus, alignment of the optics(Optical Level) was produced. The balance on the tripod, and install with three screws set the axis indication on the camera for horizontal incident and move side camera-page horizontal in the space made was.Devices Levelling  just to be able to create a square, horizontal, in space were, and to determine the elevation difference of the points from the pieces, graded the wood that the same indicators are used was.Adding a page, a graded horizontal to the camera, the possibility of measuring the horizontal angles between the two stretches on the ground to this vehicle was added. (Source the book the basics of mapping - Avalanche Saint NIA)is a device Levelling  (new) from a few part has been formed: telescope alignment page calibrate the angle of the horizontal screw set  ( in some models)

Dimensions (cm)
21 * 13 * 15
Weight (kg)
3
Application
پروژه عمرانی"

Zoom in
32
Object lens diameter (mm)
36
Minimum focus distance
0.5
Domain correction
± 15
Image
Direct

Horizontal lamp rating °
1
Accuracy (mm)
1.5

User's comments and scores