Solar inverter PIP1624HSE EPsolar

Phase inverters are divided into two major types of single phase and three phase. Also in terms of output waveforms, the following four types are divided: square waveform output sinusoidal correction (regular) sinusoidal correction output (step) sinusoidal pure output recommended for solar systems, inverters It is pure sine, but if the purpose is purely for lighting or power for the CCTV, the use of quasi-sinusoidal inverters is not a problem for the system. Other solar inverters are two types of grid connected and grid-independent. Switches the power supply to AC mains by converting DC voltage to AC Nand. The most famous brands of inverter connected to the network are SMA, Growatt and Steca. Cotek, Minwell's Meanwell, EPEVER and SMA are also well-known brands in network-independent inverters. Among the important parameters to consider are the following: Deep Discharge Protection Battery Overvoltage Shutdown Over Voltage Shutdown or Over Temp / Overload Protection Over load Short Circut Protection Polarity Protection System Reverse Polarity Protection Automatic operation in various conditions (load detection, stand by mode, overload, overvoltage, reconnection, etc.) Input voltage proportional to presentation scheme Complete 220 V Sinusoidal Output with Frequency 50 MPHz Solar Model PIP1624HSE 32 Dimensions 0 * 225 * 88mm, weighing 5.8kg, is marketed in electrical and electronic equipment and is a DC to AC solar converter with 1600 watts of output power. This solar inverter, suitable for use in solar power plants, utilizes 24V DC input and 230V AC output and its output waveform is pure sine. Other Specifications: Maximum Charge Current The inverter, which receives power from the solar panels, is 25 amp and its charging algorithm is MPPT. This solar converter has features such as fuses to prevent the reverse of the polarity of the battery, fuse against the reverse polarity of the battery, suitable for Off-Grid or Grid, etc. and its input and output frequency is 60/50 Hz.