Water pump CDA 2.00 T Local Ebara

Pump head or pressure:

Pump head or pressure means how high that pump can raise the fluid that is pressurized. Air for centrifugal pumps is in meters or feet and for rotary pumps and positive displacement head in terms of Calculates the bar, PSI, and kPa.

Pump Types:
Water and drainage pumps vary widely in size, size, type and type of impeller and body, performance and application, and range from small linear pumps to large turbine pumps. Contact Rasakala Technical Partners to help you make the best choice. Pumps in general can be said to include dynamic pumps and positive displacements. Positive displacement pumps include rotary and reciprocating pumps and their types are as follows:

The rotary pump includes gear pump, loop pump, vacuum progressive pump, pre-pump, screw pump and blade pump.

The reciprocating pump also includes a floating piston pump and a diaphragm pump.

Rotary pump function:
In rotary pumps, fluid displacement is accomplished by rotating the gear and camshafts or blades.

Reciprocating Pump Performance:
In reciprocating pumps, the energy is transmitted periodically. In these pumps they are also the driving force of most of the electro-motors. A suction cylinder occurs and causes the fluid to suck into the valve. Then, by returning the piston, the fluid that is sucked is directed outward through another valve. . If you intend to supply electropumps to increase water pressure for home use or irrigation of crops, this product is a good option. This electropump is a type of two impeller centrifuge called "CDA 2.00 T Local". Ebara manufactures the centrifuge pump. It is a three-phase pump with a maximum rotational speed of 2850 rpm. The pump has a power of 1500 watts and a current of 4.1 amps. The characteristics of this 27kg centrifuge pump can be mentioned as the maximum pumping height and discharge rate. The inlet pipe diameter is one and a quarter inches and the outlet pipe diameter is 1 inch. The maximum water temperature that can be pumped with this machine is 90 degrees Celsius. The company manufactures the body and propeller of the pump made of cast iron and brass, respectively.

Other Details :
Suitable for increasing the water pressure of residential and industrial units

Suitable for increasing water pressure for irrigation

Suitable for non-corrosive water and fluids

Suitable for general and industrial applications