Diamond Bit D-16508 Makita

The drill is one of the most important components of the drill that plays an important role in the drilling of objects. Drillers are used for drilling various surfaces such as concrete, iron, wood, aluminum, copper, building materials, and so on.

Iron Drill:
This type of drill has the ability to withstand high temperatures and high speeds, which is used to drill all kinds of metal surfaces inserted at the bottom of the drill.

Cobalt Drill:
The same is the iron drill, this type of drill is HSS type but it can withstand higher temperature and speed due to the percentage of cobalt that is more fragile than conventional HSS model which is for harder surfaces than iron such as steel and steel. Stainless steel with carved Co% n mark at bottom.

Diamond drill:
This type of drill is used for drilling in concrete and building materials. It is recommended that when working with this drill, place your drill in a hammer to ensure that drilling is done correctly.

Wood drill:
This type of drill has a sharp tip for a more even placement on the surface, which can easily be punctured with a wooden surface.

Round Drill:
This type of drill has a hollow round shape with a diamond or serrated edge that is suitable for round cuts on wooden surface, glass, concrete, plaster and so on to clear that point to a certain height.
For example: Empty halogen lights on the ceiling It should be noted that when drilling a glass with a round diamond drill, use some water to prevent over-tightening.

SDS plus four groove drill and pen:
This type of drill is used for demolition and concrete machines and medium power.
This type of drill is more commonly used for high-strength concrete drills because it can withstand impact energy and transmit impact energy better.

Drill:
It is for drilling on high-diameter wooden surfaces, which are used for hinges and locks, and are the most commonly used sizes of 20 and 22 mm.

Gas drill:
This drill is very used in the cabinet and cabinet industry, which is used to create the hinge logo hinges.

Difference between leaf drill and gas drill:
The drill bit is used for deeper drilling in the wood and the drill bit for the deeper drilling of wood.

Drill bit:
This type of drill is used for cleanliness and beauty. So that the flower (the end of the screw) is placed inside the piece of wood and hides.

Aluminum Drill:
It is used for drilling on soft metal surfaces such as aluminum, copper and brass.

Description :
-Excavator for all construction materials: stone, artificial stone, concrete, ceramic, cement and tile

-Number 7 (The diameter of this drill is 7 mm)

- 100 mm long

- Installable on three systems

-This drill has 1 diamond which facilitates drilling on concrete and wall.

-Tungsten