Elevator Rails Monteferro

Rails, elevator are steel-made and task-driven cabin lift to the face, vertically.CF Doublet, usually in the branches of 5 yards, and in thickness also with the level of cross-sectional T-shape are produced. In mounting rails accuracy was found that the level of all of them, machining is the smallest inflection or torsion do not have. On the two rails, a tab and a groove ( a male and pistils ) that exists at the time of installation with either latch are. The rails must be plumb to face parallel with each other in the well of the elevator installation. In Italy, the industry lifts much progress and for the design and production of all kinds of elevators and its parts like the rails, the elevators of modern technology and advanced machinery enjoying gets. Continue with one of the best rails the elevator Italian, you'll be able. Rails, lift Monte insertion in the country of Italy, with the symbol MF made and has a groove side, and the logo carved factory Monte insertion Italy. The rails in a variety of T5, etc. T9 and T16 is generated. So far, at the time of shipment, the rails any deviation and the deviation has not been seen . The rails of the surface is very smooth and polished properly. Real Monte insertion, Italy, in the elevator, the elevated application has a very. Also to install in the elevator full, the traffic is convenient. Against abrasion and wear brake line emergency (plane) is very resistant. Also, for lifts with capacity of 10 and less than 15 Storeys, is appropriate.