Water storage tank 40000litr-5mm Bamin Tahvie

This source prevents the pump from working without a water supply at a definite time or lowering the water pressure. According to national building regulations, buildings with more than 4 floors or more than 10 apartment units must have a storage tank to supply the building with water for 12 hours. Consider consuming 150 liters per person per day. For example, a building with 10 residential units and an average of 3 inhabitants per unit should have a storage capacity of about 2250 liters.  Reasons to Install Water Storage Tank:   Preventing water interruption in piping Distribution of water consumed by the building at any time when the water supply is cut off from the municipal network.To prevent pressure and peak consumption in the urban water supply network Control of water pressure required for plumbing distribution of water consumed by the buildingZoning (distribution) of water distribution in tall buildingsProtection of urban water network  Conditions and location of water storage tank or reservoir The reservoir or water source should not be installed in areas exposed to floods, groundwater, or under sewage and unsanitary water.If the reservoir and reservoir are exposed to groundwater, sufficient space around the water should be provided for periodic visits to ensure that groundwater does not penetrate into it.If a water storage tank or reservoir is installed inside the building, it should be installed in such a way that it can be easily seen and maintained and cleaned. If the water storage tank is installed in a free space or on the roof, it must be covered with appropriate insulation to prevent frost or heat, and the lid of the tank or manhole should be protected with removable insulation.