Duct split 2 TON Goodman

The duct air conditioning systems, which also include Goodman's duct splits, typically consist of two parts, an indoor unit (air conditioner) and an outdoor unit (condenser). The indoor unit is installed inside the unit or somewhere connected to the unit. Exterior veneer (condenser) is installed outdoors such as roofs, balconies, courtyards, etc. Indoor unit (air conditioner): Cooling: This device uses an air conditioner fan after sucking the air inside the unit through the return channel to remove it from the filter and purify it. It then passes the purified air through the cooling converter (DX evaporator coil) and transfers the generated heat to the various units of the unit through the flow channels. Heating: Heating is produced in several ways in duct air conditioning systems, which are usually used in Iran by two methods: hot water coil or hot air furnace (French). The hot water passes and then heats up and is directed into the outlet ducts (hot coil water is generated by the home motor or package). In hot air oven (French): In winter, the burners of the device are turned on by gas and its flames pass through the pipes of the heat exchanger and the body of the converter radiates. The gases produced come out of the chimney. The air conditioner passes through the hot tubes of the converter and after heating, it is transferred into the ducts. External unit (condenser): In this device, Freon R22 gas is compressed by a compressor and is prepared for cold production and is transferred to the indoor air conditioner by copper pipe. Unlike other cooling systems, cold production operation occurs only inside the indoor air conditioner, which prevents energy loss and two. Increasing the efficiency of the device is one of the most important advantages of this system is the production of cold in the indoor unit (air conditioner). Attributes : Remove condensers from the facade of the buildingIndependent for each unitRemove long and multiple piping from the unitRemove the fan coil and multiple radiatorsEasy to repair and maintainEliminate vertical channels and increase unit areaVery low noise internal panelLow startup currentHeating function up to -10. CThe long life of the compressor and the ability to distribute the air through the air duct are other features of Goodman's duct split due to its high pressure.Goodman split ducts come with a wall controller.Important points in choosing and buying Goodman Split Duct (GOODMAN)The dimensions mentioned in Goodman's Goodman split duct table are without considering the dimensions of the hot water coil and the maintenance space.Before choosing and buying Goodman Goodman split duct machine, calculate the cooling and thermal load capacity and the space to be monitored.For less consumption, it is better to use two or more split duct devices in units larger than 200 square meters and zoning different spaces (dreams; reception ....)One of the notable advantages of duct split system compared to other channel air conditioners is the ability to run copper piping at high length and height.Considering the history of Goodman Goodman Split Duct and the numerous numbers implemented in our dear country, it should be noted that Goodman Goodman Split Duct is one of the best devices available in Iran.Therefore, using the maximum efficiency of duct split device requires technical and professional design and implementation of these systems in ducting, copper piping and hot water, etc.