Unit heater 1SUHW2-50 Saravel

Attributes : As mentioned, Saravol unit heaters are produced in two types, in 12 models and in 2 standard types and high capacity.Saraol hot water heater units have 900 and 1400 rpm motors and in this heater unit, suitable dampers have been used to guide the air.The heating values ​​of the above hot water heater unit are considered in the case that the inlet water temperature to the heater unit is 82 degrees Celsius (180 degrees Fahrenheit) and the inlet air temperature is 60 degrees Fahrenheit.Saraol hot water heater units have a galvanized body with a thickness of 1.5 mm and an electrostatic powder coating.The above-mentioned Saravel hot water heater unit has a two-row copper coil with a diameter of 3.8 inches and in higher models it has a 1.2-inch steel coil that is pressurized at 200PSI or (13 times) after construction.The electric motors used in the above heater units are based on single-phase or three-phase capacity.The blades used to make the aeration unit of the Sarol hot water heater unit are made of aluminum and are directly connected to the motor.By dividing the heating capacity of the heater unit (BTU) by 10,000, the device's hot water flow (GPM) value is calculated.