Two-way solenoid valve 032U7142 Danfoss

In general, the solenoid valve is responsible for interrupting the fluid flow in an emergency. To do this, a signal is sent as a current to the solenoid coil, and when the coil is activated, the fluid path is disconnected or connected. Electric valves are produced in two types, Normally open and NC (NC), which indicate the normal state of the valve. Danfoss solenoid valves have different types of valves, including piston, diaphragm, needle, motorized, etc. , 2/3 and 2/4 are displayed, the first number on the left indicates the number of valve cases and the second number indicates the number of valve valves. The small ones overlap. Here are some tips to help you buy an electric valve:The type of fluid and the chemical and mechanical properties of the fluid usedFluid pressure in the inlet and outlet of the solenoid valvePay attention to the compatibility of solenoid valve with environmental conditions and consider the risks of explosion, humidity, air temperature, magnetic field, foreign particles, etc.Attributes :2/2 electric solenoid valveFittings size 1/2 1 inchDiaphragm size 1/2 1 inch0.53 inch drive sizeSuitable for neutral (non-corrosive) fluids and waterSuitable for steam fluid up to 4 timesSuitable for liquid fluids up to 10 timesCoil-dependent temperatureServo diaphragmOrdinary open - NOReliable choice - high efficiencyHas a variety of international approvals